Usually Error 3 on a Hettich EBA 270 laboratory centrifuge is caused by an imbalance in the rotor. This can happen if the samples or tubes inside the rotor are not distributed evenly, causing an uneven load during rotation.
It may also occur if there is debris or tube caps or other foreign objects in the bowl chamber.
To resolve Error 3 on a Hettich EBA 270 laboratory centrifuge, it is recommended to follow these steps:
1. Turn off the centrifuge and unplug it from the power source for safety.
2. Check the rotor and ensure that it is properly balanced and free from any damage or obstruction. Make sure that the tubes or samples are evenly distributed within the rotor.
If the above steps do not resolve the issue, we can help you fix the centrifuge.